LCD screen type AGV trolley wired controller, comes with aviation plug, and is equipped with male and female terminals

LCD screen type AGV trolley wired controller, comes with aviation plug, and is equipped with male and female terminals, and the middle connection is provided by the purchaser. There are 8 action execution buttons on the controller side panel, another button for start and emergency stop functions, and one with LCD screen. It is connected to the controlled end PLC through the RS232 data interface. The 8 action buttons, the start control command and the data to be displayed by the PLC return are two-way interaction through the RS232 data interface, and the Moudbus protocol communication,

1) Emergency stop corresponds to the IO control signal mode alone, independent of the data interface, so that in any emergency, it can be photographed separately and instantly cut off the total power supply of the controlled end device to ensure the safe operation of the device.

2) 8 action execution buttons, all in jog mode, and no interlock logic is set, which is convenient for back-end PLC custom processing;

3) The content required to be displayed on the LCD screen is transmitted and displayed in real time through the ASCII code sent by the RS232 interface of the PLC, and the baud rate is 38400. The number of transmission data to be displayed and the name of the content unit shall be negotiated when the order is placed;

4) The start function layout is a key rotary switch, which is convenient for authorized persons to use.

This time the AGV line controller non-standard customized model DH-Z8FSXP232YX (DC24V/RS232/Moudbus/wired/with LCD screen)!

1. Stable control signals will ensure no interference during use. The unique signal is encrypted and coded, and there is no interference when using multiple sets of remote controllers in an environment.

2. Stainless steel buttons and Industrial reinforced nylon plastics shell, more resistant to be broken and smudge.

3. The transmitter is sealed with silicone rubber ring, which is good waterproof.

4. Heartbeat packet detection:Once the transmitter is damaged or the signal is lost, the receiver will stop automatically.

5. The antenna is built inside to prevent it from being broken.

6. Each set remote control has unique ID identification code, even if the same frequency also does not interfere with each other.

Default configuration

1. Transmitter * 1 pcs

2. Receivers * 1 pcs

3. The receiver comes with 1m cable connector

4. Operation and Maintenance Manual

Attentions

1. Due to transportation requirements, the product is not equipped with battery.

2. The function can be customized according to your requirements, please contact the supplier.

Warranty & Service

1. Customized logo and trademark are warmly-welcomed.
2. Good after-sale services offered.
3. 1 year warranty period, spare parts supply for free.
4. 100% QC inspection before shipment.

FAQ

1.Q: Is there a warranty?
A: All our branded products have a 12-month warranty period. We provide 24-hour after-sales service and technical support. If you find any problems during installation, please feel free to contact us.
2. Q: Will you provide after-sales service?
A: Yes. Of course. If there are any problems during operation or installation, please keep free to contact with us. We provide professional guidance and help.
3. Q: What is your minimum order?
A: We can accept sample orders for trial orders.
4. Q: What certificates are approved for your product?
A: We have CE, FCC, ISO9001.
5. Q: Is your price the lowest?
A: We provide high quality industrial remote controls. The quality of our supply is value for money, inferior products will waste and affect the work process. The right price and high quality products are the best choice.
6. Q: Can you customize it to my needs?
A: You can send me inquiries according to your needs. We can customize them with technical engineers.

OUR ADVANTAGES

QUALITY ASSURANCE

To provide quality products at the same time to improve after-sales support

GOOD SERVICE

An independent R & D and design company with ten years of technology accumulation, which can be quickly customized.

OWN FACTORY

We have own assem- bling factory and mold factory.

PROFESSIONAL TEAM

Professional team to provide you with efficient service.

Direct sales from the source manufacturer！

Three year warranty！

Nanjing Dihuai Electronic Technology Co., LTD., located in Nanjing, Jiangsu Province, China, is manufacturer of industrial remote control. At present, it has been involved in the non-standard customization of industrial wireless / wired remote control for thousands of devices.

We have 29 new practical technology patents and appearance patents of the company's special products, and have the capability of functional design and development for various non-standard and customized requirements such as software, hardware, circuit design, panel logo design and layout design.

Products include:

Remote control of construction vehicle such as:

Unmanned vehicles, excavators, tunnel boring machine remote control, remote control remote control remote control of shield machine, garbage trucks, sanitation car remote control, remote control car remote control, remote control, concrete pump truck behind stage snowmobiles, paver, remote control, remote control robot arm, loading machine, unloading machine remote control, remote control remote control dump trucks, loader remote control, remote control, tractor repair car remote control Vehicle remote control, mobile crushing station remote control, bucket turbine remote control, tracked vehicle remote control, orchard transport vehicle remote control, pesticide spray vehicle remote control, sugarcane harvester remote control, fire truck remote control, etc.

Construction machinery remote control such as:

Tower crane remote control, port crane remote control, hoist remote control, winch remote control, ship crane remote control, hoist remote control, chain hoist remote control, bevel machine remote control, opening machine remote control, stone cutting machine remote control, Longmen remote control, manipulator remote control, mechanical arm remote control, etc.

Robot car remote control such as:

Fire robot remote control, welding robot remote control, AGV car remote control, RGV car remote control, intelligent manipulator remote control, EMS car remote control, etc.

Other non-standard customized remote control:

wireless video function remote control, 1000-5000 meters long working distance remote control, ultra-low temperature -40 degrees remote control, wired controller, multi-to-multi-selection remote control, etc.

DiHuai products are the priority choice for you!